How Much to Charge Freelance: A Rate-Setting Method That Actually Works
A step-by-step way to calculate a freelance rate from your actual costs and billable hours, sanity-check it against the market, and then get it into a clean invoice.
By Invoala Editorial Team · Published 2026-11-11 · Updated 2026-11-13
You decide how much to charge freelance by doing one calculation and then one check. The calculation: add up what you need to earn in a year, divide it by the hours you can realistically bill. The check: compare that number with what clients in your field actually pay. If the two land close together, you have a rate. If they don't, you've found the real problem — either your costs are too high for the hours you sell, or your positioning is too generic to command the market rate.
Everything below is a way to do that with numbers instead of vibes.
Start from what you need to earn, not what others charge
Most freelancers work backwards from the number they see in job ads, then wonder why the money runs out. Go forwards instead.
List your annual costs in three groups:
- Business costs: software, equipment, insurance, accountancy, bank fees, marketing, co-working, professional tools.
- Personal draw: the amount you actually need to pay for housing, food, transport and everything else.
- Tax and contributions: income tax, self-employment or social contributions, and pension. The percentages vary a lot by country and by income, so look up your own rate with the relevant tax authority rather than borrowing a figure from a blog.
Add these three. That's your required gross revenue. Now divide by billable hours.
The trick is getting billable hours right. A full-time year is around 2,080 hours, but you don't sell those. Subtract holiday, sick days, admin, invoicing and chasing payment, marketing, and unpaid learning. Many freelancers who work full time find somewhere around 1,200 to 1,400 hours a year are genuinely billable — your own figure depends on how much non-billable work your business needs. Use the lower end if you're just starting and have to sell hard; use the higher end only if you have steady, repeat clients.
Divide required revenue by realistic billable hours and you have a floor hourly rate. Anything below it loses you money over the year, even if the invoice looks healthy.
Photo by Towfiqu barbhuiya on Unsplash
Example: building a rate from real numbers
Say you need €4,000 a month as a personal draw, your business costs run €600 a month, and you set aside roughly 30% of revenue for tax and contributions. That's €4,600 a month before tax, so about €55,200 a year, plus the set-aside.
Working it cleanly: €55,200 ÷ 0.70 ≈ €78,860 of annual revenue needed. Divide by 1,300 billable hours and your floor rate is about €61 per hour.
Now test it. At €75 an hour — a modest buffer above the floor — 1,300 hours gives roughly €97,500 gross. After the 30% set-aside that's about €68,250, or €5,690 a month, which covers the €4,600 in costs and draw with something left over for quiet months and bad debts.
That buffer matters. Say you invoice €2,400 for a project, then spend three unpaid hours chasing it. You haven't just lost time; you've reduced the effective rate of a 30-hour job from €80 to about €73 an hour. That's why late payment is a rate problem, not just an admin annoyance — a point worth keeping in mind when you set up automated payment reminders so follow-ups don't quietly eat your margin.
Ready to try it? Create a professional invoice in under two minutes with Invoala's free invoice generator, no sign-up and no watermark.
Check the number against the market before you commit
Your floor is what you need. The market is what clients will pay. Both matter.
Look at live evidence rather than rate surveys: job posts in your field that list a budget, agency day rates quoted publicly, and what peers charge — ask two or three people directly, since published "average freelance rates" tables are often years out of date or skewed by agency markups. Where you sit within the range depends on your specialism, seniority, portfolio, whether you're competing locally or internationally, and how urgent the client's need is.
If your floor is above the typical market range for your work, you have three realistic options: specialise into a higher-value niche, cut business costs, or accept fewer billable hours with higher rates. If your floor is well below the market, don't undercut for long — it makes you look inexperienced and leaves no room for the slow months.
For a fuller look at how rates sit alongside retainers, day rates and project pricing, see the pillar guide on how to charge clients for freelance work.
Photo by Aaron Lefler on Unsplash
Turn the hourly figure into day rates and project prices
Clients often ask for a day rate or a fixed project price, and the conversions trip people up.
- Day rate: multiply the hourly rate by the hours you'll genuinely work, usually 6 to 8 for a full day once breaks and interruptions are accounted for. Simply multiplying by 8 and assuming every hour is productive tends to underprice you.
- Project price: estimate hours per deliverable, add a revision allowance (10–20% is common, depending on how specific the brief is), then multiply by the hourly rate. Add a risk allowance for unclear scopes or clients with slow feedback.
- Retainers: price the committed monthly hours at your hourly rate, and state clearly what happens when the client exceeds them.
Two habits keep this honest. First, time your first few projects for real, even roughly — freelancers routinely underestimate by a third. Second, put the scope in writing before you start, ideally as a free estimate or quote the client accepts, so a later conversation about "extras" has a reference point.
Whatever pricing model you pick, the rate only becomes money when it's on a clear invoice with payment terms the client has seen. A short guide to creating an invoice correctly covers the fields that most often cause payment delays, and freelancer-specific billing habits are covered in invoicing for freelancers.
How Invoala helps once the rate is settled
Working out the number is the hard part. Turning it into a document the client can pay without a follow-up email is mostly clerical — and that's the part worth making quick.
1. Put the rate on paper. Use the free invoice generator: fill in your details, the client's, the line items, hours or quantities, and your rate. There's no sign-up and no watermark on the PDF.
2. Get the layout right. Choose a template if you want a starting structure — the downloadable invoice templates cover common freelance formats. The output is A4-accurate, so it prints and files the way clients expect.
3. Add tax carefully. Enter your own tax rate as a line item rather than guessing. Whether you charge sales tax or VAT, and at what rate, depends on your country and on the client's location — check the official guidance for your situation.
4. Send it and keep track. Once invoices are out, use payment tracking to see at a glance which are paid, due or overdue, so a slow payer doesn't sit unnoticed in a folder.
5. Handle the awkward part. If something is overdue, the reminder tools do the chasing for you instead of you writing a third polite email.
The upgrade is optional; the core invoicing flow is free to use. Details are on the pricing page.
Revisit the rate twice a year
A rate isn't permanent. Costs rise, skills improve, and the billable hours you can sell change as your client base matures. Diarise two reviews a year: one to recheck your annual costs and tax set-aside, one to look at what you're actually earning per hour across projects.
The test is simple. Take each project's total price, subtract the hours you spent including revisions and admin, and divide. If your effective rate keeps landing below your floor, the rate isn't the problem — the scoping, the client mix, or the unpaid chasing is. Fix that, then reset the number.
Related reading
Frequently asked questions
How do I calculate my freelance hourly rate from scratch?
Add your annual business costs, personal draw and tax set-aside to get required revenue, then divide by realistic billable hours — often closer to 1,200–1,400 than 2,080. The result is your floor: the lowest rate that still covers the year.
Should I charge hourly, daily or per project?
Hourly suits open-ended work, day rates suit on-site or workshop-style engagements, and fixed project prices suit clearly defined deliverables. Many freelancers quote projects but calculate internally from an hourly floor, adding a revision and risk allowance.
What if my calculated rate is higher than what clients pay locally?
That usually means the gap is in positioning or costs, not pricing. Options include specialising in a higher-value niche, selling to clients in markets with higher rates, trimming business costs, or accepting that fewer billable hours at a higher rate is the realistic model.
Do I need to add tax to a freelance invoice?
It depends on your country, your registration status and where the client is based — some freelancers must charge VAT or sales tax, others must not, and cross-border work often has its own rules. Check your tax authority's official guidance rather than copying a rate from someone else's invoice.
Can I make a professional invoice without paid software?
Yes. Invoala lets you fill in a form and download an A4-accurate PDF with no sign-up and no watermark, which is enough for most freelance work. Payment tracking and reminders for overdue invoices are there if you want them, with an optional paid upgrade.
Put it into practice
Create a professional invoice in under two minutes — free, no sign-up.
Create an invoice